This section covers the Blueprint and Quick Chart functionality in Present.
Blueprint functionality allows users to wireframe a presentation design where charts are needed. The chart widgets within Blueprint can be further configured to create charts directly on the presentation through Quick Charts.
These allow users to create charts directly on the presentation without going through Yellowfin Data Discovery’s report builder. Quick Charts are created using Blueprint widgets, which include some of the most widely used chart types, and choosing the Simple Report creation option.
Note: For more advanced reporting, use Yellowfin’s Data Discovery.
The following types of Blueprint Widgets are included in Yellowfin.
Chart icon | Chart name | Description |
---|---|---|
Number chart | For charts with numeric report results. | |
Pie chart | For pie or ring charts. | |
Column chart | For charts with vertical columns. | |
Line chart | For time series charts. These can appear as line or area chart. | |
Meter chart | For meter charts. | |
Bar chart | For horizontal bar charts. | |
Overlay chart* | For charts where a line chart is overlaid on a bar chart. The line chart represents a trend and the bar chart emphasizes specific values. | |
Map chart* | For map charts to showcase geographical data. | |
Scatter chart* | For a scatter plot chart, where points are not joined. | |
Heat grid* | For a chart that plots the intensity of a metric across multiple categories. |
* These widgets are currently only used as Blueprints, without the functionality to extend them to Quick Charts. Users can, however, use the Advanced Report option to create these charts via the Chart builder in Yellowfin Data Discovery.
A Quick Chart can instantly be created by dragging a Blueprint Widget and using the properties panel to configure the chart.
You can add a title and description for it in its properties panel (make sure the Blueprint Widget is selected on the slide to make its properties panel appear).
Use the Activity Stream button (bottom right of the screen) to discuss and collaborate with other team members on your Blueprint further. |
To create a Quick Chart (created directly in the presentation) or even an advanced chart (created in the report builder, but added here upon publish), proceed with the following steps.
Click on Create Report. You’ll be faced with two options:
Create Simple Report: This option allows you to create a Quick Chart within the presentation slide.
Create Advanced Report: This allows you to create an advanced report. On doing so, you will exit the presentation and navigate to the report builder in Yellowfin Data Discovery. Create a report as per normal, and publish it. Then close the Report page to jump back into the same presentation where your newly created advanced report will be displayed.
In this tutorial, we’ll be creating a Quick Chart, using the Create Simple Report button. Click on it to bring up the following form.
Select a view from the list. Then select a dimension and series (metric) field for the chart.
Click on the Create button.
To further configure this chart, open the chart’s property panel, which will display additional fields, which vary for each chart type. Each chart will also differ based on the minimum set of fields to be defined for it.
Then in the Chart Settings section, define additional settings.
Refer to the chart type section below for further details on their specific configurations. |
Learn how to configure each type of blueprint chart widget to generate a chart in your presentation.
Field | Description/Instruction |
---|---|
Field Selection | |
Metric | Choose a metric field for your number chart |
Field | Description/Instruction |
---|---|
Field Selection | |
Label | Choose a dimension field as the pie chart category. (These will make up the pie ‘slices’ or segments.) |
Size | Select a series fields, which serves as your metric or measurement field. |
Chart Settings | |
Enable drill down | Allows you to enable drill down functionality on the chart. |
Color set | Select a color set for the pie chart. Options include:
|
Color | If ‘Monochrome’ is selected as the color set, then select a color. The pie chart colors will be based on different shades of this color. |
Chart type | Select what type of chart to generate, pie or ring. |
Other segment % | Define a percentage limit for the ‘other’ category of the pie chart. That is, all values below this will be merged together to form the other category. |
Show legend | Allows you to show or hide legends on this chart. |
Show labels | Allows you to show or hide labels on each category. |
Define the following chart fields to generate a vertical column chart.
Field | Description/Instruction |
---|---|
Field Selection | |
Dimension | Choose a dimension field for the chart. |
Series | Select a series fields, which serves as your metric or measurement field. |
Aggregation | Apply an aggregation value on the primary series. You can aggregate the values with the following options:
|
Color | Select a color for the chart. This will be applied to the primary series. |
Optional Fields | This is an additional field you may select for a slightly more advanced chart. Note that you may only select one of the following options:
|
Second series | If ‘Second series’ is selected as the optional field, then select a second metric field to be added to the chart. |
(Second series) Aggregation | Apply an aggregation value on the second series. You can aggregate the values with the following options:
|
(Second series) color | If a second series is specified, then select a color to display this series in. |
Color field | If ‘Color field’ is selected as the optional field, then choose a dimension field as the color field. |
Function | If ‘Function’ is selected as the optional field, then select a chart function to be applied. Options include:
|
Chart Settings | |
Enable drill down | Allows you to enable drill down functionality on the chart. |
Axis type | If the chart has a second series, then you can further configure the axis type. Options include:
|
Date unit | If you have selected a date dimension field, this setting allows you to change the date unit. Note: you cannot select a date unit lower than the unit defined in the view. |
Axis summary | Enable this setting to apply automatic abbreviation to axis labels. This is useful for charts with large numeric values. For example, 10,000,000 will be changed to 10m, making it easier to read. |
Sort by | Change the sort order of how dimension values are displayed. Sort these values by:
|
Sort order | Allows you to choose the sorting direction between ascending and descending.
|
Trim values (toggle) | If your selected dimension field contains too many values to the point where it’s difficult to read your chart, enable this toggle to trim or cut out values from the chart. |
Trim display | If your dimension fields contain too many values to the point where it’s difficult to read your chart, you can use this setting to trim or cut out values from the chart.
|
Trim value | If value trim is enabled, specify the amount of values (N) to be cut out from the chart. |
Show other dimension | Enable this to sum all trimmed out values together and display under a separate ‘Other’ field. |
Color set | Define the color property of the chart.
|
Function settings | This section allows you to manage settings related to some of the chart functions. |
Function type | If the accumulation function is enabled on the chart, you can choose whether this value should be displayed as the accumulative % of the total line, or the running total. |
Value | If the Reference line function is selected, then specify the position of this line by providing the exact value. |
Label | If the Reference line function is selected, then provide its label. |
Color | If the Reference line function is selected, then specify its color. |
Define the following chart fields to generate a line chart.
Field | Description/Instruction |
---|---|
Field Selection | |
Dimension | Choose a dimension field for your quick chart. For line charts, these are limited to date fields to generate time series. |
Series | Select a series fields, which serves as your metric or measurement field. |
Aggregation | Apply an aggregation value on the series, you can aggregate the values with the following options:
|
Color | Select a color for the chart. This will be applied to the primary series. |
Optional Fields | This is an additional field on your chart. Note that you may only select one of the following options:
|
Second series | If ‘Second series’ is selected as the optional field, then select a second metric field to be added to the chart. |
(Second series) Aggregation | Apply an aggregation value on the second series. You can aggregate the values with the following options:
|
(Second series) color | If a second series is specified, then select a color to display this series in. |
Color field | If ‘Color field’ is selected as the optional field, then choose a dimension field as the color field. |
Function | If ‘Function’ is selected as the optional field, then select a chart function to be applied. Options include:
|
Chart Settings | |
Enable drill down | Allows you to enable drill down functionality on chart. |
Time Unit | By default the time unit of the chart will be the same as that of the selected dimension field. But you may use this to change the default time unit. Note: you cannot select a date unit lower than the unit defined in the view. |
Null behaviour | Allows you to fill in any gaps, null or missing values in a time series chart. Options include:
|
Date slider | Allows you to include a date or time slider to the chart. |
Color set | Define the color property of the chart.
|
Function settings | This section allows you to manage settings related to some of the chart functions. |
Function type | If the accumulation function is enabled on the chart, you can choose whether this value should be displays as the accumulative % of the total line, or the running total. |
Trend type | If the Trend function is applied, then choose a trend type. Options include:
|
Forecast type | If the Forecast function is applied, then choose a trend type. Options include:
|
Value | If the Reference line function is selected, then specify the position of this line by providing the exact value. |
Label | If the Reference line function is selected, then provide its label. |
Color | If the Reference line function is selected, then specify its color. |
Define the following chart fields to generate a meter chart (also called a gauge chart). These are used to measure the rate of change of a measure against pre-defined targets.
Field | Description/Instruction |
---|---|
Field Selection | |
Measure | The series or metric field that serves as the measure for the meter chart. |
Aggregation | Select the type of aggregation to apply to the measure value. ‘Default’ applies the default aggregation applied at the view level to the selected measure field (if any is applied). Other options include:
|
Chart Settings | |
Target type | Allows you to select how to add a target value to the chart, to highlight it through needles or other indicators. Options include:
|
Target value | If Manual target type was selected, then provide the value of the target. |
Target | If 'Field' target type was selected as the target type, then choose a data field as the target (must be a numeric field). |
(Target) Aggregation | Apply an aggregation value on the target field. You can aggregate the values with the following options:
|
Define the following chart fields to generate a horizontal bar chart.
Field | Description/Instruction |
---|---|
Field Selection | |
Dimension | Choose a dimension field for the chart. |
Series | Select a series fields, which serves as your metric or measurement field. |
Aggregation | Apply an aggregation value on the primary series. You can aggregate the values with the following options:
|
Color | Select a color for the chart. This will be applied to the primary series. |
Optional Fields | This is an additional field you may select for a slightly more advanced chart. Note that you may only select one of the following options:
|
Second series | If ‘Second series’ is selected as the optional field, then select a second metric field to be added to the chart. |
(Second series) Aggregation | Apply an aggregation value on the second series. You can aggregate the values with the following options:
|
(Second series) color | If a second series is specified, then select a color to display this series in. |
Color field | If ‘Color field’ is selected as the optional field, then choose a dimension field as the color field. |
Function | If ‘Function’ is selected as the optional field, then select a chart function to be applied. Options include:
|
Chart Settings | |
Enable drill down | Allows you to enable drill down functionality on the chart. |
Axis type | If the chart has a second series, then you can further configure the axis type. Options include:
|
Date unit | If you have selected a date dimension field, this setting allows you to change the date unit. Note: you cannot select a date unit lower than the unit defined in the view. |
Axis summary | Enable this setting to apply automatic abbreviation to axis labels. This is useful for charts with large numeric values. For example, 10,000,000 will be changed to 10m, making it easier to read. |
Sort by | Change the sort order of how dimension values are displayed. Sort these values by:
|
Sort order | Allows you to choose the sorting direction between ascending and descending.
|
Trim Values (toggle) | If your selected dimension field contains too many values to the point where it’s difficult to read your chart, enable this toggle to trim or cut out values from the chart. |
Trim Display | If your dimension fields contain too many values to the point where it’s difficult to read your chart, you can use this setting to trim or cut out values from the chart.
|
Show Other Dimension | Enable this to sum all trimmed out values together and display under an ‘Other’ field. |
Color set | Define the color set of the chart.
|
Function settings | This section allows you to manage settings related to some of the chart functions. |
Function type | If the accumulation function is enabled on the chart, you can choose whether this value should be displays as the accumulative % of the total line, or the running total. |
Value | If the Reference line function is selected, then specify the position of this line by providing the exact value. |
Label | If the Reference line function is selected, then provide its label. |
Color | If the Reference line function is selected, then specify its color. |
This section covers other properties details of a Blueprint Widget.
|